Final Audio ZE3000 SV Noise Cancelling True Wireless Earphone

Equipped with evolved in-house development driver "F-Core SV"

Completely wireless earphones are often adjusted to the equalizer with software, which is often adjusted to the equalizer, and as a result, the sound quality tends to be tired to listen to. In this product, a newly developed driver "F-Core SV (Ef Core)", which has been largely larger from 6mm to 10mm, and is the same as a wired earphone that uses the acoustic space inside the earphone housing. By adjusting the sound quality, the sound quality is satisfied without equalizer. In this way, we perform extremely effective corrections that can only be done by equalizers, such as lowering the sound pressure of the narrow band as a pinpoint.

Equipped with "F-LINK port" that optimizes internal pressure inside the housing

Completely wireless earphones need to store batteries, electronic substrates, antennas, etc. at a high density in the housing. Therefore, the degree of freedom to adjust the sound quality by acoustic means is low, and the sound is forced to create sounds in severe constraints. In general complete wireless earphones, the low frequencies are excessive and you have to emphasize the high frequencies to balance. As a result, it tends to lose naturalness, such as making a flashy sound that emphasizes both the low and high frequencies, but also the vocals are far away. In addition, since waterproof performance is required for completely wireless earphones, it is difficult to design a vent (a vent hole) that optimizes the pressure of the acoustic space inside the earphone housing outside the housing.

This product is newly developed and equipped with a "F-Link port" that optimizes the pressure of the acoustic space inside the earphone housing while maintaining the waterproof performance and enables the same acoustic design as a wired earphone.

As a result, it is difficult to achieve a low -frequency control that was difficult to achieve with the sound quality design of the complete wireless earphone, and the vocals that tend to feel far away or can be heard in a basket are alive with the balance intended by artists. And play. In addition, even in low -frequency playback such as drum kicks and bass lines, it has a high quality of the vocal and a sense of separation that does not suffer from vocals.

Equipped with "Comfort ANC" that combines sound quality and sound insulation performance

Due to its principle, general ANC (active noise canceling) affects the regeneration sound, such as a time delayed and a low range. Also, if the effect of ANC is enhanced, the feeling of oppression may result in so -called "no -can" or "no -can -can -drunk". This product is equipped with "Comfort ANC", which prioritizes sound quality and comfort without sound quality and pressure due to its own algorithm.

Equipped with "wind cut mode" that reduces wind noise

The noise that hits the microphone of the earphone body is reduced to reduce the sound of "wind blowing" to make it easier to hear the playback sound.
You can easily turn ON/OFF by pressing and hold the left or right earphone body for 2 seconds for 2 seconds, so it can be used as a pinpoint when you are worried about the sound of the wind.

High -quality codec "LDAC" compatible with high -resolution sound sources can be played

Compared to "SBC", we transmit up to about three times the amount of information and support "LDAC", which can play music playback up to 96kHz / 24bit. High -resolution sound source can be played and you can enjoy music with high sound quality while being completely wireless.

Equipped with "gaming mode"

When the gaming mode is started when connected to Bluetooth®, a low -delay connection of up to 60ms is achieved. Not only can you play without worrying about delays during the game, but also when watching movies and live videos, the movement of the performers' mouth and sound do not match.

* It can be set in the dedicated application Final Connect.

Compatible with multi -points

Compatible with multi -point connection that can connect to Bluetooth® at up to two units at the same time. It is possible to operate each seamlessly without connecting the two terminals at the same time and switching the connection. For example, you can pair your PC and smartphone, and you can receive a smartphone incoming while listening to music on a PC.

* It can be set in the dedicated application FINAL CONNECT. * It can be set in the dedicated application FINAL CONNECT.
* If you turn on the multi -point, the high -quality codec "LDAC" cannot be used.